ss2000 rev 1.01 programming help

Discussions regarding lighting, sirens, and other PS/Emergency response equipment can be had within this forum.

Discussions regarding legalities of lights, usages, and different state laws and regulations regarding warning equipment are not permitted.
See the announcement inside the forum for more details.

Moderator: Queue Moderator

Post Reply
kd5vou
Posts: 4
Joined: Mon Jun 19, 2006 3:04 pm

ss2000 rev 1.01 programming help

Post by kd5vou »

I have used the board search function and could not find the answer I need.

I have bought a used FS SS2000SS (slide switch) (no signal master) (sticker shows rev 1.01 on bottom)and have it installed. The only problem I have is that the previous owner had it programmed way different than what I need.

I can only find programming instructions for the signal master versions

I had to go online to the FS website to get the installation manual. Within the install manual it references programming instructions in the configuration manual. Can not find this configuration manual.

If anyone has this configuration (Programming) manual or can post the instructions PLEASE help

Thanks
KD5VOU
Top
Post Reply

Return to “Vehicle Warning Equipment Discussion”