Flash adapter schematic

jim · Post by **jim** » Fri Nov 02, 2001 1:18 pm

I see that Batlabs shows a schematic for the flash adapter for HT/CDM series that has an on/off switch. Today, I used a "M" brand adapter that has a switch labeled "A/off/B"
Is this the same adapter or what? What does the "M" adapter's third position do?
What is the "on/off" equivalent to on the "M"s "a/off/b" switch?
I want to build one of these for the HT/CDM series, but want to make sure I'm headed in the right direction.

Tony Soprano · Post by **Tony Soprano** » Fri Nov 02, 2001 1:22 pm

The double switch means that it can do
mobiles and portables. To do portables, switch to A. Mobiles, switch to B. I haven't looked inside mine, so I don't know how it is wired. The Batlabs schem. may be just for the portable.

Tony

jim · Post by **jim** » Fri Nov 02, 2001 2:30 pm

Okay, now.....anyone have one that they can take apart?
If I build one, I'd like to make it with both positions.
I cant believe that "M" charges us what they do for a "jumper" plug!