Posted: Sat Nov 03, 2001 8:39 am
<HTML>
<h3>
<font color=red> EGADS !! Hopefully this will solve the problem></h3>
</font>
<li>See the photo !! This is a Older Series Program Cable
which I have used for years. Works Great for me.
<li> The Screw at the bottom secures the Contact face to the cover shell.
<li><img src="http://www2.4dcomm.com/metrotech/stx_wc.jpg" border=0>
<p>
When addrssing the STX821's for reading / writing, you
should make sure your Contacts are Clean, and free of
debrie. Also I would recomend a stable programming
platform.<p> If you give up, I have STX821's which
have the Enhanced Boards for 195.00+Shipping.<p>
Monty
<font></HTML>
<font size=-1>[ This Message was edited by: msisco9939@aol.com on 2001-11-03 11:40 ]</font>
<font size=-1>[ This Message was edited by: msisco9939@aol.com on 2001-11-03 11:42 ]</font>
<h3>
<font color=red> EGADS !! Hopefully this will solve the problem></h3>
</font>
<li>See the photo !! This is a Older Series Program Cable
which I have used for years. Works Great for me.
<li> The Screw at the bottom secures the Contact face to the cover shell.
<li><img src="http://www2.4dcomm.com/metrotech/stx_wc.jpg" border=0>
<p>
When addrssing the STX821's for reading / writing, you
should make sure your Contacts are Clean, and free of
debrie. Also I would recomend a stable programming
platform.<p> If you give up, I have STX821's which
have the Enhanced Boards for 195.00+Shipping.<p>
Monty
<font></HTML>
<font size=-1>[ This Message was edited by: msisco9939@aol.com on 2001-11-03 11:40 ]</font>
<font size=-1>[ This Message was edited by: msisco9939@aol.com on 2001-11-03 11:42 ]</font>