Page 1 of 1
XTS5000: Fail 001 ?
Posted: Thu May 13, 2010 12:11 pm
by W2WP
I know what it is/means but my question is has anyone ever had this pop up for one or two hours and then never happen again?
Is this just letting me know that soon I will have the Fail 001 error for good if I do not have it fixed?
Inquiring minds want to know!
Mark / W2WP
Re: XTS5000: Fail 001 ?
Posted: Thu May 13, 2010 2:45 pm
by Mfire39
Give us some specifics of the 5000 in question.. Bandsplit, Firmware, etc...
-Marc
Re: XTS5000: Fail 001 ?
Posted: Thu May 13, 2010 4:07 pm
by spectragod
out of lock.
Re: XTS5000: Fail 001 ?
Posted: Thu May 13, 2010 10:43 pm
by MattSR
VCO cant lock. can be temperature related if you've pushed it out of band and you're on the edges.
Re: XTS5000: Fail 001 ?
Posted: Mon May 17, 2010 8:00 am
by W2WP
Sorry for the delay in getting back. Info on the radio is as follows:
2007 Serial Number
Host: 12.00.03
DSP: 12.00.07
All tags match/included
Q806 ASTRO Digital Operation
H14 Enhanced Digital ID Display
Q52 Federal Government FPP
H869 Hardware Multikey Encryption
H35 Conventional Systems Operation
G857 FDNY Emergency Rx/Tx Tone Set
Q53 FCC FPP And Radio Cloning
Q387 Conventional Voting Scan
Q445 Fireground Accountability Software
Q446 Channel Announcement
Q667 ADP Encryption Software DSP Based Only
The funny thing is after this happened a few times over the course of 2 hours, it has never happened again even with daily use. There is nothing OOB programmed into the radio and when it did occur, there were no unusual temp issues.
Re: XTS5000: Fail 001 ?
Posted: Mon May 17, 2010 3:13 pm
by spectragod
More than likely a part going bad, or a bad solder connection. When intermittant like that, temp hot/cold plays a large role.