GM300 Narrow-band

[metalmick]

Hi,

Any ideas about parts in Australia to convert a GM300 wide-band (25Khz) to narrow-band (12.5Khz).

FL51 9180097D04 455Khz 6F
FL52 9180098D04 455Khz 4F
Y51 9180022M03 Filter 45.1 Mhz 12.5Khz

Thanks, Mick

[Will]

Mick,

So you need these parts down there?

[Satelite]

Hello:
If i scan the info from motorolas 25khz wide band to 12.5 narrow band instruction sheet = Will someone upload it to this site for all to see ?
I have the sheet that tells whats needed for both UHF or VHF models.
Good for the GM300/M10/M120/M130 and yes the Maxtrac/Radius M100/208/216 mobiles as well if the rf bd is new enough.
Says so on the sheet from Motorola.
If someone will ill scan and email it out to them to put up on the site.
Any mods interested ?
Satelite

[metalmick]

Mick,

So you need these parts down there?

Yeap, Electronics is a dead art in Australia!

Hello:
If i scan the info from motorolas 25khz wide band to 12.5 narrow band instruction sheet = Will someone upload it to this site for all to see ?
I have the sheet that tells whats needed for both UHF or VHF models.
Good for the GM300/M10/M120/M130 and yes the Maxtrac/Radius M100/208/216 mobiles as well if the rf bd is new enough.
Says so on the sheet from Motorola.
If someone will ill scan and email it out to them to put up on the site.
Any mods interested ?
Satelite

I'm sure that batlabs.com, repeater-builder.com and I would be most interested in the document

[TWEMARS]

After about 5 years of peddling narrow band GM300's Motorola coam out and said that's not the way to do it. Buy this whiz-bang new (SM50 or M1225, I forget) radio. It's narrow band is sooo much better.