Batboard

I have just received a large number of MT1000 99 channel VHF units to repurpose (Commercial to Ham). I have set up the first unit (this is my first experience with the MT1000, but have a fair amount with other Motorola radios). I see now that there is no "clone" feature in the RSS to copy the frequency and channel options to other radios. Is a cloning cable the only way of programming the others with the new setup? I really don't want to edit every individual codeplug, nor do I want to write the tuning information from one radio to another. Thanks!

It's been a while, but IIRC, you simply use the write function everytime...it's not serial number specific, similar to the HT/CDM series. The tuning values should not transfer.

No cloning, simply write to all the like bandsplit radios and align after.