error code 01/42 after cloneing with CPS vers 292.0
Posted: Wed Oct 30, 2024 9:57 am
Received a new batch of XPR 2500 radios and tried to clone a CPS 122.0 file into a new XPR2500 that requires the 292.0 software. When the radio boots up it
briefly shows a 01/42 error code. How do I clear that? or do I have to take another new radio and build a new profile from scratch?
Ok, so I just decided to start from fresh using another of the new radios as a master and just copy and pasted Zone config whihc is all I need for this customer.
The web info I got mentioned firmware upgrading, etc., to clear the error code, but screw dat.
briefly shows a 01/42 error code. How do I clear that? or do I have to take another new radio and build a new profile from scratch?
Ok, so I just decided to start from fresh using another of the new radios as a master and just copy and pasted Zone config whihc is all I need for this customer.
The web info I got mentioned firmware upgrading, etc., to clear the error code, but screw dat.