Batboard

Greetings... I have a VHF model JT1000 that cause a low data type pulse noise when transmitting. It is very similar to a computer data burst that rythmiclly ticks. It does this when transmitting any frequency, also it is not affected by narrow/mid/wide settings. All sidetones and data settings are currently disabled...Radio works flawlessly otherwise.

Any ideas ?


Thank's
Randy

sounds like the famous Jedi noise which can be cured with a retrofit kit that has some better shielding of the RF board and controller. Don't have the REX number off hand, but it is actually called a "Jedi noise kit".

Depending on the model here are the following kit numbers:

Full Keypad replacement kit
REX4395A List 63.50

Limited Keypad replacement kit
REX4396A List 69.50

Top display replacement kit
REX4397A List 69.75

2/8/16 channel replacement kit
REX4398A List 42.00

Hope this helps...

DB

He has a JT1000 and needs a NOISE KIT not ht1000 front panels.
I will look when I get to work monday. I may have a couple
on the shelf or if not I should be able to track down the # for you
if you have not got it from someone else by then. Phrawg

REX4465A

Oh god

My old JT1000 had this

It drove me NUTS, and yes, the Jedi Noise kit did fix it.